Network-technologies CAT5 Bedienungsanleitung PDF herunterladen (Seite 27)

OSD Settings Menu

To enter the OSD Settings Menu, press <O> from the Settings Menu. (From the Command Mode menu press <T> - <O>.) Using

the OSD Settings, the user can resize and reposition the OSD window on the monitor as desired. Changes to the OSD settings

will only affect the logged-in user.

Figure 19- OSD Settings Menu

Function Description Keystroke

Move OSD Window Down Moves the OSD window down on the monitor

D or

Move OSD Window Up Moves the OSD window up on the monitor

U or

Move OSD Window Right Moves the OSD window to the right on the monitor

R or

Move OSD Window Left Moves the OSD window to the left on the monitor

L or

Make OSD Window Taller Makes the OSD window taller on the monitor

Make OSD Window Shorter Makes the OSD window shorter on the monitor

Esc Exit the OSD Settings menu. Any changes are

automatically saved.

Esc

Change Scan Dwell Time

The scan dwell time determines how long the PRIMUX will stay connected to a Host Adapter (in Scan Mode- page 20) while the

user is idle before switching to the next Host Adapter. When the <T> is pressed from the Settings Menu (From the Command

Mode menu press <T> - <T>), a field will appear around the current value for the scan dwell time. The user can enter any value

between 2 and 255 (seconds). The default scan dwell time value is 5 seconds.

Figure 20- Scan Dwell Time field

Function Keystroke

Enter value

002-255

Save the new value Enter or

Tab

Exit

Esc

The default resolution of the OSD menu

is much lower than the average CPU

display setting. We recommend

adjusting the size of the OSD menu

before connecting to a CPU (i.e. make

adjustment immediately after powering

on the User Station, before connecting

to a CPU). Once a CPU connection is

made, the OSD menu will appear smaller

due to the higher resolution setting.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Keine Kommentare

Network-technologies CAT5 Bedienungsanleitung Seite 27