Network Technologies CS-16/8 Bedienungsanleitung Seite 13
- Seite / 79
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
8
2. GETTING STARTED
Introduction
This chapter covers basic configuration topics. Included is information on setting up the TERMINAL to control the SERIMUX.
1. Using the instruction under “Setup The TERMINAL” below (or more detailed instruction on page 37), setup the TERMINAL to
make connection to the SERIMUX. Configure the terminal as follows:
• Ethernet Mode set to OFF (F4 menu)
• Baud rate at 9600 bps (F4 menu)
• 8 bits (F4 menu)
• no parity (F4 menu)
• 1 stop bit (F4 menu)
• no flow control (F4 menu)
• ANSI or VT100 terminal mode (F2 menu).
Within the SERIMUX firmware, the "CONSOLE" port is the internal connection between the TERMINAL and the
SERIMUX. For consistency, when Port 0 is mentioned within this manual, it refers to the connection made by the
TERMINAL.
2.1 Setup The TERMINAL
To control the SERIMUX some initial settings must be configured in the TERMINAL.
2.1.1 Entering TERMINAL Setup
Hold down the [ ALT] key and press the [ Esc] key to enter Setup mode. When entering Setup, any text on the screen temporarily
disappears, and the main SETUP directory appears (See Figure 6). When leaving the Setup mode, the main SETUP directory
disappears, and any text that was on the screen will reappear.
2.1.2 Setup Directory
The fields at the bottom of the screen show the various setup menus where the terminal's operating parameters can be changed
and the function key to press to immediately display any menu.
Figure 6- Fields in the Setup menu display which function keys to press for submenus
2.1.3 Changing The TERMINAL Operating Parameters
To select one of the setup menus shown, press the indicated function key.
- The screen for that menu appears with the name highlighted.
- The fields at the middle of the screen indicate the parameters that can be changed in that menu.
- The top line identifies the keys to press to highlight the parameter fields and change the settings.
The procedure is: (1) Use arrow key to highlight the parameter field to be changed.
(2) Use the Spacebar to change the parameter.
Pressing [F12> always returns the user to the top menu.
- SERIMUX-TERM-CS-16/8 1
- i 2
- TRADEMARK 2
- COPYRIGHT 2
- CHANGES 2
- TABLE OF CONTENTS 3
- TABLE OF FIGURES 5
- List of Tables 5
- INTRODUCTION 6
- Terminal Converter 6
- Console Switch 7
- MATERIALS 8
- FEATURES AND FUNCTIONS 9
- 1. INSTALLATION 10
- IEC Power Connector 11
- Powercord 11
- Monitor 12
- 2. GETTING STARTED 13
- 2.1 Setup The TERMINAL 13
- 2.2 Connect to the SERIMUX 14
- 3.1 Administrator Controls 17
- 3.1.2 Port List 18
- 3.1.3 Port Settings 19
- 3.1.3.1 Port serial settings 21
- 3.1.3.2 Modem settings 23
- 3.1.3.3 Port data buffer 24
- 3.1.4 User List 25
- 3.1.5 User Settings 26
- 3.1.5.1 Port access 27
- 3.1.5.2 Copy User Settings 27
- 3.1.6 Advanced Settings 28
- 3.1.6.2 Firmware 29
- 3.2. User Controls 31
- 3.2.2 User main menu 32
- 3.2.3 Port List screen 33
- 3.2.4 User Terse mode 34
- System Reset button 35
- 3.3 Firmware Upgrade 36
- Login the administrator 38
- Login user to a port 39
- Disconnect and logout a user 40
- Connect 2 host ports 40
- Disconnect 2 ports 41
- Attach or detach a modem 41
- 4. USING THE TERMINAL 42
- F3- Keybd SETUP Menu 44
- F4- Comm SETUP Menu 44
- F5- Misc SETUP Menu 45
- F6-Tabs SET-UP Menu 45
- F11- Colr2 Set-up Menu 47
- 4.3 Local Keyboard Commands 50
- 4.4 TERMINAL Command Guide 51
- Same 55
- page line col 55
- 4.5 ANSI Command Guide 62
- Redefine keys with string 67
- *3 CAN (CTRL X) Same 68
- 4.5.2 VT52 Command Guide 69
- Introduction 70
- 4.6.1 Basic Setup 70
- 4.6.2 Setup for LPD 71
- 4.6.3 LPD printing 72
- 4.6.4 Setup for TFTP 72
- 4.6.5 TFTP Printing 72
- 5. HARDWARE INFORMATION 73
- 5.4 Serial Port Cabling 74
- 5.5 Serial Port Pinouts 74
- 5.6 Cable Adapters 75
- SUB-D 25 77
- WARRANTY INFORMATION 79
Verwandte Produkte und Handbücher für Netzwerk-Switches Network Technologies CS-16/8
(38 Seiten)American Standard 0634 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Möbel American Standard 0634.
Wir stellen 1 PDF-Handbücher American Standard 0634 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Kommentare zu diesen Handbüchern